The electrostunning machine has been designed to help the raising and manipulation on board a ship of large pelagic species like the Big Eye Tuna and the Mako Shark while carrying out longline surface fishingtechniques specifications
of the machine
Electrostunning machine by electroshock
ARRANGEMENT
To prevent salt damage, install OPERATION BOX and
WELDING MACHINE belowdecks to keep away from seawater.
Install PUSH-BUTTON SWITCH in better position to operate.
(working space for pulling tuna)
Secure the edge of CABTYRE CABLE (welding machine side)
to a wall of bridge and secure a place to put coiled CABTYRE
CABLE on deck
CHECK THE ELECTRICAL CONNECTION
Please check output voltage. Output voltage from welding
machine is 40volts when press PUSH-BUTTON SWITCH.
Please check the energization bewteen HOLDER(white)
and ELECTRODE, and between EARTH(black) and
EARTH PLATE by use of circuit tester
OPERATING PRECAUTIONS
Do not press down the PUSH-BUTTON SWITCH for long
time. (with one touch/single touch of a button)
TROUBLESHOOTING
If the surface of ELECTRODE or EARTH PLATE get rusted,
rub off the rust using sandpaper to expose stainless surface.
Leaking seawater into CABTYRE CABLE from joint part of
ELECTRODE or EARTH PLATE cause disconnecting.
In that case, cut off leaking point and reconnect
ELECTRODE or EARTH PLATE. (in case of leaking seawater
into CABTYRE, leaking point become discolored.)